Start | Index | Overview • PREV | UP | NEXT

net.simplace.client.simulation.lap.hillflow.HillFlow1D

Component Variables

Content Type	Name	Description	Data Type	Unit	Min Value	Max Value	Default Value
constant	cBELMANS	-	BOOLEAN	1	-	-	false
constant	cBINT	parameter b for calculation interception by Rutter	DOUBLE	1	-	-	0.0
constant	cDIREKT	-	BOOLEAN	1	-	-	false
constant	cDSTO	parameter Dveg for calculating interception by RUTTER	DOUBLE	1	-	-	0.0
constant	cDTX	Array of time intervals	INTARRAY	s	-	-	-
constant	cDZF	depth of subsurface	DOUBLE	m	-	-	0.0
constant	cFEUR	-	DOUBLE	m3/m3	-	-	-
constant	cGALPHA	-	DOUBLE	m-1	-	-	-
constant	cGenAlfa	Parameters alfa for each layer for vanGenuchtens equation	DOUBLEARRAY	m-1	-	-	-
constant	cGenDeltaTheta	Resolution of theta for pre-calculating and storing the vanGenuchten values	DOUBLE	m3/m3	-	-	0.01
constant	cGenN	Parameters n for each layer for vanGenuchtens equation	DOUBLEARRAY	1	-	-	-
constant	cGenThetaR	ThetaR for each layer for vanGenuchtens equation	DOUBLEARRAY	m3/m3	-	-	-
constant	cHAUDE	-	BOOLEAN	1	-	-	false
constant	cHLIM3H	Threshold of soil-water tension for crop transpiration reduction at hight transpiration	DOUBLE	m	-	-	-
constant	cHLIM3L	Threshold of soil-water tension for crop transpiration reduction at low transpiration	DOUBLE	m	-	-	-
constant	cHLIM4	-	DOUBLE	m	-	-	-150.0
constant	cHOMAX	limit at which infiltration surplus runs off	DOUBLE	mm/h	-	-	-
constant	cHZMAX	limit at which subsurface flow occurs	DOUBLE	mm/h	-	-	-
constant	cIBU	Switch for lower soil boundary: 0=no flow, 1=constant, 2=free flow	INT	1	-	-	-
constant	cINTMAX	maximum interception	DOUBLE	1	-	-	0.0
constant	cIQO	Switch for infiltration surplus method: 0=complete runoff, 1=no runoff, 2=runoff up to QOCONST, 3=runoff if greater than HOMAX	INT	1	-	-	-
constant	cIQZ	Switch for subsurface flow method: 0=complete runoff, 1=no runoff, 2=runoff up to QZCONST, 3=runoff if greater than HZMAX	INT	1	-	-	-
constant	cIROOT	switch for distribution of roots per layer: 1=uniform(FEDDES), 2=triangle(PRADAS), 3=trapez(VGENUCHTEN), 4=as input from other module	INT	1	-	-	-
constant	cIZVARY	Constant(=0) or variable(=1) thickness of layer	INT	1	-	-	0
constant	cKSAT	conductivity at saturation for each layer	DOUBLEARRAY	m/s	-	-	-
constant	cLABIZEPT	switch for interception calculation: 0=no interception, 1=constant interception, 2=Rutter-model	INT	${unit}	-	-	0
constant	cLayerDepth	depth of layers	DOUBLEARRAY	m	-	-	-
constant	cMAKKINK	-	BOOLEAN	1	-	-	false
constant	cMESSUNG	-	BOOLEAN	1	-	-	false
constant	cMONTEITH	-	BOOLEAN	1	-	-	false
constant	cMinimalTimeStep	Minimal time step for calculation of vertical flows.	DOUBLE	s	1.0E-5	3600.0	0.1
constant	cNGENU	-	DOUBLE	1	-	-	-
constant	cQOCONST	maximum of runoff	DOUBLE	mm/h	-	-	-
constant	cQZCONST	maximum of subsurface flow	DOUBLE	mm/h	-	-	-
constant	cRITCHIE	-	BOOLEAN	1	-	-	false
constant	cRainInterval	Time intervall between precipitation measurements in seconds	INT	s	-	-	-
constant	cTHETAO	initial volumetric water content	DOUBLEARRAY	m3/m3	-	-	-
constant	cTHETAS	volumetric water content at saturation for each layer	DOUBLEARRAY	m3/m3	-	-	-
constant	cTHETBU	initial volumetric water content at the bottom	DOUBLE	m3/m3	-	-	-
constant	cTopsoilDepth	depth of topsoil	DOUBLE	m	-	-	0.9
constant	cVMA	-	DOUBLE	m3/m3	-	-	-
input	iActualPrecipitationHeight	actual precipitation height	DOUBLEARRAY	mm	-	-	-
input	iActualPrecipitationTime	time in seconds of day when the precipitation is measured	INTARRAY	s	-	-	-
input	iBBG	soil cover rate with plants (calculating interception by RUTTER)	DOUBLE	1	-	-	-
input	iETPMES	measured evapotranspiration	DOUBLE	1	-	-	-
input	iFACPL	plant factor for calculating evapotranspiration by MAKKINK or HAUDE	DOUBLE	1	-	-	-
input	iLAI	Leaf area index	DOUBLE	1	-	-	-
input	iLpl	plant height in cm	DOUBLE	cm	-	-	-
input	iPHI	relative humidity	DOUBLE	1	-	-	-
input	iPotentialEvapoTranspiration	Potential EvapoTranspiration per day	DOUBLE	mm	-	-	-
input	iRelativeRootLengthPerLayer	relative root length per layer	DOUBLEARRAY	m	0.0	20.0	-
input	iRg	global solar radiation	DOUBLE	W/m2	-	-	-
input	iRn	net solar radiation in W/m**2	DOUBLE	W/m2	-	-	-
input	iRootRestrictionFactor	root restriction factor due to aging	DOUBLEARRAY	m	0.0	20.0	-
input	iTEMP	air temperature	DOUBLE	°C	-	-	-
input	iWIND2	wind speed at 2m height	DOUBLE	m/s	-	-	-
input	iZROOT	Depth of roots in m	DOUBLE	m	-	-	-
state	sDMF	-	DOUBLE	???	-	-	-
state	sDRYDAY	-	INT	???	-	-	-
state	sDT	-	INT	???	-	-	-
state	sDTH	-	DOUBLEARRAY	???	-	-	-
state	sDTMAX	-	DOUBLE	1	-	-	0.0
state	sDTOLD	-	INT	???	-	-	-
state	sDZ	-	DOUBLEARRAY	???	-	-	-
state	sDZFNEU	-	DOUBLE	???	-	-	-
state	sDZM	-	DOUBLE	???	-	-	-
state	sETPACT	-	DOUBLE	mm	-	-	-
state	sETPPOT	-	DOUBLE	mm	-	-	-
state	sEVAACT	-	DOUBLE	mm	-	-	-
state	sEVAPOT	-	DOUBLE	mm	-	-	-
state	sFAV	-	DOUBLEARRAY	???	-	-	-
state	sFEU	-	DOUBLE	???	-	-	-
state	sFEUS	-	DOUBLE	???	-	-	-
state	sFLV	-	DOUBLEARRAY	???	-	-	-
state	sH	-	DOUBLE	???	-	-	-
state	sH1	-	DOUBLE	???	-	-	-
state	sHZ	-	DOUBLE	???	-	-	-
state	sHZ1	-	DOUBLE	???	-	-	-
state	sIDTACT	-	INT	???	-	-	-
state	sINF	-	DOUBLE	???	-	-	-
state	sINFEX	-	DOUBLE	???	-	-	-
state	sINFMAK	-	DOUBLE	???	-	-	-
state	sINFMIK	-	DOUBLE	???	-	-	-
state	sINTACT	-	DOUBLE	???	-	-	-
state	sINTENS	-	DOUBLE	???	-	-	-
state	sINTEVAP	-	DOUBLE	???	-	-	-
state	sMAEX	-	DOUBLE	???	-	-	-
state	sMAINF	-	DOUBLE	???	-	-	-
state	sNDT	-	INT	???	-	-	-
state	sNETRAIN	-	DOUBLE	???	-	-	-
state	sNSOIL	-	INTARRAY	???	-	-	-
state	sNT	-	INT	???	-	-	-
state	sNZDTM	-	INT	???	-	-	-
state	sNZF	-	INT	???	-	-	-
state	sNZR	Number of layers with roots	INT	???	-	-	-
state	sOUTFL	-	DOUBLE	1	-	-	0.0
state	sQOUT	-	DOUBLE	???	-	-	-
state	sQOUTZ	-	DOUBLE	???	-	-	-
state	sRAIN	-	DOUBLE	mm	-	-	-
state	sSINTEV	-	DOUBLE	???	-	-	-
state	sSLASTR	-	DOUBLE	???	-	-	-
state	sSUMIEX	-	DOUBLE	???	-	-	-
state	sSUMINF	-	DOUBLE	???	-	-	-
state	sSUMINT	-	DOUBLE	???	-	-	-
state	sSUMMEX	-	DOUBLE	???	-	-	-
state	sSUMMIN	-	DOUBLE	???	-	-	-
state	sSUMNETR	-	DOUBLE	???	-	-	-
state	sSUMRAIN	-	DOUBLE	???	-	-	-
state	sSUMTHEO	-	DOUBLE	???	-	-	-
state	sT	-	INT	???	-	-	-
state	sTHETA	-	DOUBLEARRAY	m3/m3	0.0	0.65	-
state	sTHETA1	-	DOUBLEARRAY	m3/m3	0.0	0.65	-
state	sTLASTR	-	INT	???	-	-	-
state	sTRAACS	-	DOUBLEARRAY	mm	-	-	-
state	sTRAACT	-	DOUBLE	mm	-	-	-
state	sTRAACTSub	-	DOUBLE	mm	-	-	-
state	sTRAACTTop	-	DOUBLE	mm	-	-	-
state	sTRAPOT	-	DOUBLE	mm	-	-	-
state	sVETPOT	-	DOUBLE	mm	-	-	-
state	sVEVPOT	-	DOUBLE	mm	-	-	-
ActualEvapoTranspiration	-	DOUBLE	mm/d	null
ActualEvaporation	-	DOUBLE	mm/d	null
ActualTranspiration	-	DOUBLE	mm/d	null
ActualTranspirationSubsoil	-	DOUBLE	mm/d	null
ActualTranspirationTopsoil	-	DOUBLE	mm/d	null
BottomFlow	-	DOUBLE	mm/d	null
DrynessFactor	-	DOUBLEARRAY	1	null
FLUXU	-	DOUBLE	mm/d	null
Infiltration	http://www.wurvoc.org/vocabularies/om-1.8/one	DOUBLE	m	null
LayerFlow	-	DOUBLEARRAY	mm/d	null
LessMobileWater	-	DOUBLEARRAY	mm	null
MobileWater	-	DOUBLEARRAY	mm	null
PotentialEvaporation	-	DOUBLE	mm/d	null
PotentialTranspiration	-	DOUBLE	mm/d	null
QOMAX	-	DOUBLE	mm/s	null
QOSUM	-	DOUBLE	mm/d	null
QZMAX	-	DOUBLE	mm/s	null
QZSUM	-	DOUBLE	mm/d	null
RainInterception	-	DOUBLE	m	null
RetainedWater	-	DOUBLEARRAY	mm	null
SUETAC	-	DOUBLE	mm	null
SUETPO	-	DOUBLE	mm	null
SUEVAC	-	DOUBLE	mm	null
SUEVPO	-	DOUBLE	mm	null
SUEVRE	-	DOUBLE	mm	null
SUTRAC	-	DOUBLE	mm	null
SUTRPO	-	DOUBLE	mm	null
SUTTRE	-	DOUBLE	mm	null
SubsurfaceFlow	-	DOUBLE	mm/d	null
SurfaceFlow	-	DOUBLE	mm/d	null
TotalAvailWater	-	DOUBLEARRAY	mm	null
TotalAvailWaterVolumetric	-	DOUBLEARRAY	m3/m3	null
TotalWater	-	DOUBLEARRAY	mm	null
TotalWaterInProfile	-	DOUBLE	mm	null
TotalWaterInProfileVolumetric	-	DOUBLE	m3/m3	null
TotalWaterVolumetric	-	DOUBLEARRAY	m3/m3	null
WFR	-	DOUBLEARRAY	mm	null
WHT15R	-	DOUBLEARRAY	mm	null
WR33	-	DOUBLEARRAY	mm	null
WRH	-	DOUBLEARRAY	mm	null

public class HillFlow1D extends net.simplace.simulation.model.FWSimComponent {
// Public Constructors
public HillFlow1D();

// Public Instance Methods

public HashMap createVariables(); // Defines
net.simplace.simulation.model.FWSimComponent

Create the FWSimVariables as interface for this SimComponent

// Protected Instance Methods

protected void init(); // Defines
net.simplace.simulation.model.FWSimComponent

Initializes the fields by getting input and output FWSimVariables from VarMap

protected void process(); // Defines
net.simplace.simulation.model.FWSimComponent

protected FWSimComponent clone(FWSimVarMap aVarMap);
// Defines net.simplace.simulation.model.FWSimComponent

}

Hierarchy: java.lang.Object - net.simplace.simulation.model.FWSimComponent (net.simplace.simulation.util.FWSimFieldContainer) - HillFlow1D